Hardware Engineer at Texas Instruments — H-1B & Green Card
By Pinal Dave | Last updated: 2026-08-02
This page models a directionally accurate H-1B-to-green-card timeline for a Hardware Engineer role at Texas Instruments, covering typical LCA wage-level mix, PERM labor certification stage, I-140 pattern, and priority-date considerations by country of chargeability. All figures below are approximate — verify against DOL OFLC LCA Disclosure Data, USCIS H-1B Employer Data Hub, and the DOS Visa Bulletin before relying on them for a specific case.
H-1B Sponsorship Snapshot: Hardware Engineer at Texas Instruments
Texas Instruments is a well-established H-1B sponsor. Based on publicly known filing patterns for employers of this size and sector, Texas Instruments typically files a few hundred to low thousands of LCAs per year, concentrated in engineering, R&D, and technology roles rather than production/manufacturing headcount. For a role like Hardware Engineer, the predominant Labor Condition Application (LCA) wage level mix is predominantly Level II-III wages for engineering roles, with Level III-IV common for senior/principal engineering and specialized R&D positions. These are typical/approximate patterns, not this employer's exact current filing counts — always confirm current-year figures in the DOL OFLC LCA Disclosure Data file before citing a specific number.
| Data Point (Approximate — verify against federal source) | Typical Pattern for Hardware Engineer at Texas Instruments |
|---|---|
| Annual LCA volume (this employer, all roles) | a few hundred to low thousands of LCAs per year, concentrated in engineering, R&D, and technology roles rather than production/manufacturing headcount — verify: DOL OFLC LCA Disclosure Data |
| Predominant prevailing wage level for this title | predominantly Level II-III wages for engineering roles, with Level III-IV common for senior/principal engineering and specialized R&D positions — verify: DOL OFLC LCA Disclosure Data |
| PERM labor certification timeline | PERM timelines at large industrial/manufacturing employers typically fall in the standard 12-24 month band, and cases tied to specialized engineering credentials can proceed with fewer RFEs when duties are well documented — verify: DOL PERM Disclosure Data |
| I-140 petition pattern | I-140 approval patterns are typically strong for well-documented specialty-occupation engineering roles with matching degree requirements — verify: USCIS H-1B Employer Data Hub |
| Priority date wait — India / China (EB-2 or EB-3) | Typically the longest queue of any chargeability group; check current EB-2/EB-3 India and China cutoff dates — verify: DOS Visa Bulletin |
| Priority date wait — Mexico / Philippines / Rest of World | Typically at or near "current," meaning the I-485 stage can often proceed once the I-140 is approved, subject to monthly Visa Bulletin movement — verify: DOS Visa Bulletin |
Modeled Timeline: Offer to Green Card
- Offer & LCA filing. Texas Instruments certifies a Labor Condition Application with the Department of Labor before filing the H-1B petition, specifying the prevailing wage level for the Hardware Engineer role and worksite.
- H-1B petition & wage level. USCIS adjudicates the H-1B petition; the certified wage level (typically predominantly Level II-III wages for engineering roles) sets the wage floor for the position.
- PERM labor certification. Once the employer decides to sponsor a green card, it runs required recruitment and files a PERM application with DOL. PERM timelines at large industrial/manufacturing employers typically fall in the standard 12-24 month band, and cases tied to specialized engineering credentials can proceed with fewer RFEs when duties are well documented.
- I-140 petition. After PERM certification, Texas Instruments (or its counsel) files Form I-140 with USCIS to establish the immigrant petition and set the priority date.
- Priority date & Visa Bulletin wait. The priority date (I-140 filing/PERM filing date) determines when a green card number becomes available, and this wait varies enormously by country of chargeability — see below.
- I-485 adjustment of status (or consular processing). Once the priority date is current per the DOS Visa Bulletin, the beneficiary (if in the US) files Form I-485, or completes consular processing abroad.
Country of Chargeability Matters
Country of chargeability is not a separate visa category — it is based on the beneficiary's country of birth (with limited cross-chargeability exceptions) and it materially changes how long the priority-date wait lasts at the same employer and wage level. For a Hardware Engineer at Texas Instruments, applicants born in India or China typically face the longest EB-2/EB-3 backlogs, often measured in years, due to per-country annual green card caps and high demand. Applicants born in Mexico and the Philippines usually see shorter, more moderate waits, and applicants from the Rest of World (RoW) category are frequently at or near "current," meaning I-485 filing can often proceed soon after I-140 approval. Because these dates shift monthly, always check the current EB-2 and EB-3 charts on the DOS Visa Bulletin for the exact cutoff applicable to your chargeability and category.
FAQs
What H-1B wage level does Texas Instruments typically use for a Hardware Engineer? Based on typical filing patterns for Texas Instruments's sector, Hardware Engineer roles are most often certified at predominantly Level II-III wages for engineering roles, though the exact level depends on the specific worksite, experience requirements, and prevailing wage survey used. Verify the current mix in the DOL OFLC LCA Disclosure Data.
How long does PERM typically take for Texas Instruments? Perm timelines at large industrial/manufacturing employers typically fall in the standard 12-24 month band, and cases tied to specialized engineering credentials can proceed with fewer rfes when duties are well documented. Actual timelines vary by DOL processing volume, audit rate, and the specific state workforce agency involved — verify current processing times against DOL PERM Disclosure Data.
Does Texas Instruments sponsor green cards for Hardware Engineer roles, not just H-1B visas? Employers of Texas Instruments's size and sector commonly sponsor PERM-based green cards for specialty-occupation roles like Hardware Engineer, but sponsorship policy varies by team, level, and internal budget. Confirm directly with the employer's immigration or HR team.
How much longer is the green card wait for an India-born Hardware Engineer versus a Philippines-born Hardware Engineer at Texas Instruments? The wage level and job title are the same, but the priority-date wait differs sharply by country of chargeability because of per-country green card caps. India (and often China) typically face the longest EB-2/EB-3 backlogs; Philippines and Mexico are usually shorter; Rest of World is often close to current. Check the DOS Visa Bulletin for the current gap.
What happens if my H-1B nears its 6-year limit before my green card priority date is current? If a PERM application or I-140 was filed at least 365 days before the H-1B 6-year limit, H-1B extensions beyond six years are typically available in one-year increments under AC21 provisions; three-year extensions may apply once the I-140 is approved and the priority date is not current. This is a general framework, not case-specific legal advice — confirm your eligibility with an immigration attorney.
Where can I verify the exact current numbers behind this page? Use the DOL OFLC LCA Disclosure Data for LCA volume and wage levels, the USCIS H-1B Employer Data Hub for petition/approval patterns, DOL PERM Disclosure Data for labor certification timelines, and the DOS Visa Bulletin for current priority-date cutoffs by category and country.
See Also
- /visa-requirements/software-engineer-at-paypal-h1b-wage-perm-green-card
- /visa-requirements/financial-analyst-at-citigroup-h1b-wage-perm-green-card
- /visa-requirements/hardware-engineer-at-broadcom-h1b-wage-perm-green-card
- /visa-requirements/software-engineer-at-dell-technologies-h1b-wage-perm-green-card
Ready to map your own H-1B-to-green-card timeline? Use VisaSherpa.ai's free planner to model your PERM stage, I-140 status, and priority-date wait based on your own employer, job title, and country of chargeability.
Data on this page is approximate and directional — verify current figures against the DOL OFLC LCA Disclosure Data, USCIS H-1B Employer Data Hub, DOL PERM Disclosure Data, and the DOS Visa Bulletin before making any filing or timing decisions.